Ode to Autumn Earrings | We’re All Ears Challenge

This month’s We’re All Ears Challenge at Earrings Everyday is all about Autumn. And of course, that means leaf shaped charms! 🙂 I used polymer clay, alcohol inks and Perfect Pearls for mine.

Ode to Autumn Earrings | Anita

The charms

On a yellow-tinged white sheet of polymer clay, I stamped leafy textures from a texture sheet, from which I cut out leaf shapes using a cutter. I also rolled up a snake, and from its pieces, added tiny stalks to the tops of these leaves. I then dripped alcohol inks – sunset, flamingo and watermelon colors – onto the sheets, ensuring they got into all the niches. Using a Q-tip, I removed some ink from the raised surfaces.

After the ink dried, I brushed gold colored Perfect Pearls into the lower half of the charms, again, ensuring that it went into the recesses.

I pressed lightly textured sheets to the back of the charms for better finishing, since the alcohol ink was messily smeared over the back too. After smoothing surfaces and edges and poking tiny holes at the top, off went the charms into the oven for a 25-minute bake.

After the baking, I lightly sanded the raised surfaces to remove more of the alcohol inks and the Perfect Pearls, leaving a colorful canvas of autumn colors and golden shine!

The earrings

I used a length of red wire to match the color scheme of the charms. For each earring, I strung a pre-wired gold loreal seed bead to the wire, placing it near the hole at the top of the leaf, and wound the wire around the leaf’s stalk. I finished the winding with an eye loop. Addition of an earring finding completed the assembly.

I love how much fun these earrings were to make, and how much fun they are to wear!


Do head on over to the reveal and blog hop at Earrings Everyday to see a plethora of autumn themed earrings from talented artists!

Advertisements

Icy Blue Earrings

This month’s We’re All Ears challenge on Earrings Everyday goes a bit meta – it is inspired by another contest! 🙂 The original contest was Circles are the New Triangles, and was hosted by Spoonflower (where you can create custom-designed textiles – oooh!) Erin at Earrings Everyday rightly thought that the designs are fun inspirations for some earrings.

One of the designs caught my eye, since I’d bought a white dress with blue prints recently. It was one of those happy times when I instantly knew which inspired elements my earrings would contain – circles! triangles! fabric! white! blue! – and which technique I’d want to use – antiquing! Though the concept for these earrings is icy blue, looking at the results, I feel like there’s a bit of spring hiding in them too.

Icy Blue Earrings | Anita

I began by rolling out a sheet of white Premo! at medium thickness, and poked pits into it in circular patterns. I then cut out triangular shapes for the focal beads, cut out arcs from their tops, smoothened the edges and faces, and baked them.

Now for the antiquing. I smeared slightly thinned blue acrylic paint on the beads and into their recesses, and after a while, wiped it off from the raised surfaces. I repeated the process once more, and lightly sanded the surfaces to remove unwanted paint. I then drilled two holes each along the top arc.

The beads were now ready for a thin coat of Vintaj glaze, and I left them to dry overnight since it was already pretty late in the day.

The next morning, I added a small jump ring to each of the holes, and connected them to a larger jump ring so it nestles in the top arc of each bead. I also added an earring finding to each of the larger jump rings.

For additional interest, I cut strips from some spare threadbare blue/green fabric, and used a lark’s head knot to tie each strip at the intersection of jump ring and earring finding. I dabbed E6000 at the back of each knot to secure it, and snipped away the ends a bit more.

I totally love this pair, and it’s a perfect fit for my dress.


Don’t forget to check out entries from the other participants by heading over to the reveal at Earrings Everyday!

Inspired by Iced Tea | We’re All Ears Challenge

The folks at Earrings Everyday host a themed monthly challenge – We’re All Ears – with a reveal and blog hop on the third Friday of the month. For July, we get to be inspired by our favorite summer drink! Doesn’t that sound like fun! 🙂

It’s pretty difficult to think of a summer drink when it’s rainy and chilly here in Bangalore 😉 but while I sipped hot tea one cold afternoon, its sister, the iced tea, came to mind. What’s not to like about a refreshing drink that readily accepts different flavors being blended in, and still maintains its inherent ‘tea-ness’ underneath!

I thought I could use the dregs from my tea for a pair of paper-based earrings… (Let the creativity flow!) And this was the result –

Iced Tea Paper Earrings | Anita

The pattern

I spread the dregs on a piece of paper, then quickly removed them. I then reduced the amount of dregs, then re-spread them again on the paper for a longer while, and removed them again. I repeated the reduce + re-spread + remove process a couple more times to get a pattern of smaller, darker brown specks over larger, lighter brown ones.

The beads

I cut out long right angled triangle paper strips, and made conical paper beads by rolling the strips around a thin piece of wire, using glue on the paper during the rolling to ensure the beads don’t unravel. These form the bead bases.

I then cut a couple of squarish shapes from the tea-patterned paper, ensuring that they are slightly larger than the length of the paper beads. I draped each square over a paper bead, retaining the same conical shape – but looser, like a slightly oversized dress – and made them stay put that way using glue.

I used a couple of layers of Mod Podge for some gloss, which I then reduced by lightly rubbing the beads with some fine sandpaper. Then I squished the base of these tea-patterned cones a bit, and twisted them. Ah now that’s a look I like!

The assembly

For each earring, I strung a dark brown bead through a long gold-colored head pin, then added the paper bead, and made an eye hole at the top, to which I attached an earring finding. For more interest, I added tiny pre-wired black loreal seed beads to a jump ring and attached it to the earring finding.

Yeah! I totally love this earring pair – simple, light and pretty. 🙂


This is a blog hop, so please check out what the other participants have made by heading over to the reveal at Earrings Everyday.

Kaleidoscopic Earrings

Sometimes, an idea strikes you, and regardless of whether you know how to execute it or not, it persists. That’s just what happened this month when a concept for a pair of earrings popped into my mind, which would work for not one but two challenges! I didn’t know if it would work out, but I did know I had to try. So these are the earrings I made using polymer clay, and they’re mostly true to how I envisioned them in my mind. That means happy times!

Kaleidoscopic Polymer Clay Earrings | Anita

This project also marks my attempting canes after a long hiatus from when I tested the caning waters. I used simple colors and simple patterns for the cane – nothing too ambitious until I get better at it. 😉 The cane turned out pretty usable, but there’s some distortion from the reduction, and I’ll need to figure out how to avoid that. The slicing also resulted in some distortion, and I learned later that I should let it cool well before I start slicing. (Lesson to remember for the future.)

As for the making of the beads – I tried out a different hollow bead concept since I knew I was going to use cane slices on the bead. I covered large, metallic beads in brown-black Premo clay – also ensuring that I poked holes in the clay to match the ones in the underlying beads. I baked the beads, and then sliced them into hemispheres so I could remove the metallic beads. I then used some liquid Sculpey to adhere the halves back together, also sticking the cane slices in a kaleidoscopic pattern along the join using more liquid clay. Another round of baking, and the beads were done!

Well not fully done, of course. I wanted to glaze them, and tried out some Vintaj Glaze for the first time. I loved it when I initially applied it, but after a day or two, I find that it’s a bit sticky, so I guess it’s not viable.

Anyway, continuing with the earrings – now I only had to add in other beads into the mix. I used beads and headpins to make simple embellishments revolving around the color scheme of the focal beads, put them all together, and voila! we have super-lightweight earrings.


With these earrings, I’m participating in these challenges –

  • Art Bead Scene Studio’s June monthly challenge, which features an oil painting, Les Ibis, by Jean Metzinger. Jean’s role in Cubism inspired me to go with the cane-based concept, and the colors and the nature theme definitely contributed.

ABS Challenge June 2018 Inspiration

  • Earrings Everyday’s We’re All Ears challenge, which features Kaleidoscopes as the inspiration for June. And who hasn’t been mesmerized by those? 🙂 I used mirroring of cane slices for the pattern on the beads, inspired by those in kaleidoscopes. I’m also pretty excited since it’s my first time participating in this challenge! 🙂 This is a blog hop, so do check out the entries from other participants by clicking on the Linky Tools link below.

    We're All Ears Challenge June InspirationPowered by Linky Tools
    Click here to enter your link and view this Linky Tools list