More Mokume-Gane

Continuing with my trials and experiments, I thought of giving mokume-gane another go, making sure I don’t accidentally use Sculpey III like last time. 🙂 I also thought I’d work in some foil with the clay.

I layered sheets of green and black Premo clay, interspersed with a couple of sheets of silver foil, and pressed down a grid stamp on them. This is one of the deeper-etching stamps we own, but I still didn’t find it deep enough to produce a viable ‘mokume look’ after a slice or two. However, trying to stamp more after slicing only results in the layers getting smooshed and thinned down more and more, so after a while, the effect is dominated by busy layers, and the pattern is barely visible. Well, this is definitely not what I want!

Hollow Pendant in Polymer Clay using Mokume-gane

I made a hollow pendant from the ‘more effect-showing’ slices, and a hollow cabochon from the slices that looked busier. I covered both pieces with translucent clay to aid in sanding and buffing. The pendant accidentally got flung during my sanding efforts, and its bail shattered, but no worries, I can use it as a cabochon now. 😉

Hollow Cabochon in Polymer Clay using Mokume-gane

As you can see, there is a whole lot of plaquing — those pesky bubble-like entities — on both pieces, so much that it obscures the mokume-gane pattern. From my research of this plaquing effect, these are not air bubbles, and they mostly occur in translucent clay. (Or maybe they can just be seen better in the translucent clay…) And unfortunately, no one really knows what causes this. This unintentional effect is fine for the items that I made this time, but what about times when I don’t want the bubbly look? There are baking processes that people have suggested to reduce the plaquing effect — like increasing the temperature gradually — and yet, they’re apparently not foolproof. I have a feeling it’s got something to do with the age of the translucent clay, and  sadly, only old clay stock is available in my country. 😛

Back to mokume-gane — I’d want to work more on the technique to get better at it, but each practice session results in many mokume gane veneers, and I don’t really think I can keep coming up with uses for them. 🙂 Any ideas to help me out?


Opposite Earrings

Another PCA-inspired project this time — an earring pair with the stripes in one running in a direction opposite to the other.

Opposite embellished earrings

The course that inspired me is Embellished veneer cabochons by Debbie Crothers. Debbie teaches how to make cabochons by applying multiple veneers, created using various techniques, onto a surface. A key component in her veneers — silkscreens — is still elusive in my local market, so I decided to work without silkscreens. I made some new veneers, and also reused leftover ones from other projects. I also made some stud earrings to attach the dangles to. I love the studs too. 🙂

I finally used some techniques that I’d been wanting to for a while —

I applied gold foil onto my clay. I rubbed the foil backing with my fingers, and the transfer was decent. Maybe it’ll be better with some quick waves of a heat gun? I’ll need to try that out sometime.

I also used liquid clay on the surface for some glossy shine! I have to consciously stop myself from abusing this technique. 🙂

I had some plans to fill up the zigzagging line in the middle, but in the end, I decided to scrap them. I’m pretty happy with this pair.