Table Makeover

My break from jewelry making continues, and I thought I could spruce up my work table while I’m not using it to work on jewelry. The front of this table’s drawers were white earlier, and though I didn’t really dislike that, some color would definitely make the table cheerier to look at. My sister has a few jars of chalk paint that she’d used a while ago to give a new look to some furniture in her room, and I borrowed a few of these paints for my redecoration project.

Before starting the paint job, I removed the drawers from the table, and wiped them clean with soapy water followed by clean water. I then masked the sides of the drawers. The drawers are made from MDF, and have some slight texture to them that I wanted to retain, so I didn’t sand them.

Table drawer makeover with chalk paint

Table drawer makeover with chalk paint

My first painting attempt didn’t go as I’d planned, and I even ended up with an accidental splotch of paint that spoiled the look of the piece, so I wiped the surfaces clean with water again. (This is a welcome advantage of chalk paints for clumsy new painters like me – do-overs are pretty easy.)

For my second, and final, attempt, I was a bit more careful with the paint. I also changed my original design just a little bit. I think I also got a bit more comfortable with the painting process, and the result was much better than earlier.

I painted the bottom half of the length of the drawers with a lighter paint. Then, I painted the top half with darker paint. I added a random pattern of circles to the lower half by brushing the rim of a small sized lid with bright paints and pressing the lid onto the painted surface. Finally, I added another coat of darker paint to the top half since it was still looking uneven. It’s still uneven on closer inspection, but that doesn’t matter much to me.

The advantage that I mentioned earlier – of chalk paint reacting to water even after application – becomes a disadvantage when the project is finished 🙂 so I ended up applying a layer of wax on the drawers, and buffed it very slightly, to increase the paint’s staying power.

I’m pretty happy with the result, and love the new look of my table!


Finishing and Machines – DIY Sanding Drum

Encouraged by the success of my DIY buffing wheel, I’ve now made a DIY sanding drum, with sanding attachments! Okay, it’s not exactly a drum proper, but it gets the sanding done. And that’s what matters, right?

At first, I tried to find stuff that could substitute as drums on drill bits, but without much success. I ended up using a tightly wound cloth as a first-attempt drum. However, I couldn’t really attach sandpaper to it very well. My brilliant sis, who has a lot of experience with glue and tape from her craftsy hobbies, reminded me of the velcro strips that we own. She has this great-quality double-sided tape, and she came up with a clever idea involving them. So I attached sandpaper to one velcro strip using double-sided tape, and fixed the companion velcro strip onto the cloth drum using a rubberband. I now have detachable sanding units! Thank you, Sis!

DIY Sanding Attachments for Polymer Clay

(Pictures in this post are of poor quality because I clicked them indoors in the evening; I might not find the time to click reasonably good pictures this weekend either, anyway.)

I was originally afraid that the gaps and overlaps in the velcro would inflict wounds on the clay surface while sanding, but found that these sanding units actually work great. I guess at the speed that the drum rotates, the surface inconsistencies of the drum don’t matter much?

I’d made a square cabochon from the earlier crackled effect veneer, and I used the DIY attachments to sand it. I guess I need to get used to this mechanized process, because I totally chipped away part of the edge while sanding! No worries though, I’ll just bead-weave around the cab to hide the entire border. 🙂 I buffed it to high gloss, though not as glossy as I made the cab that I used to test my buffing wheel.

Glossy Crackled Effect Polymer Clay Cabochon

So now, not only do I not have to strain my arm during sanding, but the sandpaper also doesn’t disintegrate as quickly, probably because most of the friction is uniform and in the middle of the strip, resulting in less pulling and tearing of the abrasive coating.

Now that I know that both DIYs — sander and buffer — produce great results, I might just improve them by (a) using something sturdier than plastic for the bit, and (b) buying a lighter power tool so the finishing becomes even more easier on my arms. (Or maybe just a stand and a motor for the drill I own right now.)

Finishing and Machines (and a DIY)

If there’s one thing that makes a project go from good to great, it’s the finishing. Not that all the processes preceding it are unimportant, but if one has worked really hard on everything but the finishing, don’t you think they’re limiting the potential of the project? 🙂

Having said that, the processes involved in finishing polymer clay — sanding and buffing — are pretty taxing on the arms if you do them by hand. And if you’ve made multiple pieces, then phew, finishing them definitely requires multiple sessions, probably split over days. And as a result (for me, at least) — Mod Podge finishing starts looking more attractive 😉 and I don’t really like that.

Mechanized tools!

So I decided to invest in mechanized tools. Earlier this year, I placed an order for a Poly-fast sanding tool, since sanding requires multiple passes with successively finer grits, and speeding up this process would result in quicker finishing. Unfortunately, the package had no tracking associated, and I ended up never getting it. Interacting with government agencies in India usually does not produce results, and this time was no exception — I have no idea where the package is. Talking to the Poly-fast team didn’t help much either — I don’t think either of us are at fault, but it still hurts to spend on stuff that you never receive. 😦

I do have a drill at home that is not used extensively, and I thought I’d try using it for my needs. DIY project on the horizon!

DIY Buffing Wheel

After some thought, I decided that if I had to choose one, then my buffing needs mechanization more than my sanding does. So far, my hand-buffing has only achieved mild sheens, not glossy shines. While some projects look better with a sheen, some look beautiful with a gloss. And while liquid clay + heat gun is a possible alternative (I used it for my Opposite earrings), it would still be thrilling to get glossier results just from buffing. Also, my local stores don’t carry Kato clear liquid clay that is required for the excellent gloss.

DIY Buffing Wheel

So I made a buffing wheel from Desiree’s how-to; I ended up using the technique that she shared from another artist. (The other artist is also named Anita, so that’s a bonus. 😛 ) I used squares from the same old tee shirt that I use for hand-buffing.

Next — Tests

I only gave the mechanism a sample trial to check that the wheel doesn’t fly away or come apart while in use, and it seems to whirl away fine, even at high speeds. Fingers crossed that it gives me good gloss! I’ll jot down the results when I run some tests.