Wire Weave Bangle

Time for a wire weaving project!

I made a wire-weave bangle last week, with a pearl bead duo forming the focal element.

Wire weave bangle

Wire weave bangle

Or it could be a wire-weave tiara, if you ask my favorite model, Penguin. 😉

Wire weave tiara?

For this bangle, I used three 16-gauge base wires and a 24-gauge weaving wire, both in a gold color. (Yup, I still use the thick wires that I ordered a long time ago.) I cut the base wires just a tiny bit longer than the intended circumference of the finished bracelet, because I wanted to add some small focal element in the end to actually finish it.

I kept my weaving wire uncut, since I’m still not good at estimating the length of wire I might need. I’d thought of measuring the wire as I unwind more and more of it, but somewhere along the way, I lost track. (This is what happens if you watch movies while working on projects! 🙂 )

I left a margin of about 2-3cm (1″) when I started to weave. The pattern is an uncomplicated one — loop twice around bottom two base wires, loop twice around top two, repeat. The weaving itself was fun, since I also had the aforementioned movie-watching to accompany it. When I reached the end, I left the same margin as the beginning. At each end, I curled the middle base wire into loops, and bent its companion wires around it. That was the difficult part — since these are 16-gauge wires, it’s pretty difficult to make minute adjustments with them, and it was impossible to not nick the wires.

I then gradually curved the entire strip into an open bangle. To close it, I strung two pearl beads onto a length of wire, added eye loops at both ends of the wire and attached it to the loops of the bracelet.

I’m pretty happy with this bangle. 🙂 My next bangle will have a new weave, of course, but I’ll also make at least one more of this one, maybe with a different color of weaving wire, since both my sis and my mom like it!