Ode to Autumn Earrings | We’re All Ears Challenge

This month’s We’re All Ears Challenge at Earrings Everyday is all about Autumn. And of course, that means leaf shaped charms! 🙂 I used polymer clay, alcohol inks and Perfect Pearls for mine.

Ode to Autumn Earrings | Anita

The charms

On a yellow-tinged white sheet of polymer clay, I stamped leafy textures from a texture sheet, from which I cut out leaf shapes using a cutter. I also rolled up a snake, and from its pieces, added tiny stalks to the tops of these leaves. I then dripped alcohol inks – sunset, flamingo and watermelon colors – onto the sheets, ensuring they got into all the niches. Using a Q-tip, I removed some ink from the raised surfaces.

After the ink dried, I brushed gold colored Perfect Pearls into the lower half of the charms, again, ensuring that it went into the recesses.

I pressed lightly textured sheets to the back of the charms for better finishing, since the alcohol ink was messily smeared over the back too. After smoothing surfaces and edges and poking tiny holes at the top, off went the charms into the oven for a 25-minute bake.

After the baking, I lightly sanded the raised surfaces to remove more of the alcohol inks and the Perfect Pearls, leaving a colorful canvas of autumn colors and golden shine!

The earrings

I used a length of red wire to match the color scheme of the charms. For each earring, I strung a pre-wired gold loreal seed bead to the wire, placing it near the hole at the top of the leaf, and wound the wire around the leaf’s stalk. I finished the winding with an eye loop. Addition of an earring finding completed the assembly.

I love how much fun these earrings were to make, and how much fun they are to wear!


Do head on over to the reveal and blog hop at Earrings Everyday to see a plethora of autumn themed earrings from talented artists!

Advertisements

Stitch Marker Case | Art Elements Challenge

The team at Art Elements hosts themed monthly challenges, which involve a reveal and blog hop at the end of the month. The theme for June is Sunflowers, picked by Sue.

I read the theme announcement, and recalled this small, cubic container that I’ve appropriated for storing my stitch markers. I’ve always wanted to decorate it using polymer clay – nothing elaborate, just a background layer and a button each in the middle of its visible faces. I imagined sunflowers as the buttons, and decided to go ahead. For a project that I wanted to make for so long, I ran into quite a lot of unexpected turns, and the results were not what I expected. I’m still wondering if I can make some modifications, so this project is still a WIP.

Polymer Clay Stitch Marker Case

Possible next step: mute the background a bit so it doesn’t overwhelm the sunflower buttons

I started out with the background, deciding to play with alcohol inks again. I drizzled some inks on a long strip of white Premo! clay (this goes around the body of the case), and spritzed it with alcohol, both when wet, and after a while when it dried up a bit. The pattern didn’t quite turn out like I expected it would, but I decided to use the strip. I followed the same process with a square sheet of clay for the lid.

For the sunflowers, I wanted to use different yellow clays from my stash. I used a mold to make flowers with each of the yellows, vertically sliced each flower into 5 roughly equally-wide pieces, then swapped pieces between different flowers. Now each flower has stripes of slightly varying yellows, and I like this look. (The flowers look a bit wan now on the bright background. In hindsight, I should’ve lightened the background – maybe by covering it with a layer of white-tinted-translucent clay? But well…)

Meanwhile, I realized too late that the case is not all metal like I’d somehow always thought it was. (Weird how we sometimes don’t notice things right in front of us.) Only the lid is metal, and the rest of the body is plastic – unbakeable, sigh. Should I try a different material? I didn’t really want to. I remembered reading about some polymer clay artists getting around this problem, making their plastic container bases withstand the baking by filling them up with water to the brim. (I should’ve tested this out before I covered it with clay, but well… :))

* I finally found the water tip, demonstrated (with pictures) by Garie Sim.

I put things together, covering the case with the background sheets, and adhering the flowers using a bit of liquid clay. The flowers still fell down or slid down a bit though, so I used a heat gun to bake them slightly and keep them in place. I burned one of the flowers in the process, but then thought “why not?” and burned the rest in a controlled manner. I’d originally thought of antiquing to highlight the texture of the flowers, but this works too!

Then came the baking, with the case filled to the brim with water. I don’t think I’ve ever been so anxious and uncertain since my first ever polyclay bake. I’m happy to report that the water-filling tip was a great one! The case is completely undamaged, and the clay still fits the case well.

All things considered, I’m amazed that this project was at least this successful – there were way too many go-with-the-flow moments with this one – and as always, I definitely learned something new. Thank you, Sue, for the inspiration that finally got me working on this long overdue item from my list! I hope I finish it to my satisfaction soon.


Since this is a blog hop, I hope you check out what the AE team and the other guests have made for this challenge!
Guests: AlysenAnita (you are here) • CatDivyaJillKathyLindaLindaMischelleNormaRavenSarajoTammy
AE Team: CarolineCathyClaireJennyLaneyLesleySue

Tide Pool Pendant | Art Elements Challenge

The team at Art Elements hosts themed monthly challenges, which involve a reveal and blog hop at the end of the month. The theme for May is Tide Pools, picked by Lesley.

I had zero creativity during most of the first half of the month since I hadn’t been feeling well. But I started feeling better, ideas started swirling around in my mind, and I was even able to experiment with yet another new material for this project. So here we have it, a tide pool pendant using polymer clay, resin and alcohol inks –

Tide Pool Pendant - PolyClay and Resin

I’ve never seen a real tide pool, but there’s no dearth of beautiful tide pool pictures online, so I picked the elements I’d want in my pendant, and sketched the layout.

The pendant frame is a store-bought one, and is about 3cm (1.25″) long, so I had to make the sea creatures pretty small in order to still have space for the water. I hand-sculpted all of the creatures with Premo polymer clay.

The starfish started out as a pliable ball, from which I tweaked out arms. I did most of the shaping using my fingers and larger ball stylus tools. For the texturing, I used smaller ball stylus tools and a toothbrush. I added some chalk-based colors to highlight the textures. I love how this has turned out, and it’s a small inspiration to try out more sculpting (which I feel is not really up my alley.)

The purplish round creature below the starfish was intended to be a sea anemone, but it was a bit too small for my amateur hands to handle, and in the end, I just made a flat circular clay surface, scored it for some texture, and quickly brushed some chalk-based colors over it to add to the texture.

The small, pink, bowl-like creatures are the tops of sea sponges. For these, I used two shades of pink clay, and rolled tiny balls from them. I then used a ball stylus tool to shape the tiny balls into tiny bowls.

I arranged all these creatures on the pendant frame, and baked the setup for 25min.

For the ‘water’, I used ICE Resin, with tiny amounts of blue and green alcohol inks added in for the color. This is my first time working with resin, and I love it! I added the inks after completely mixing the 2 resin parts, and mixed the resin again to help the ink assimilate. After carefully pouring and prodding the resin into various nooks and crannies of the pendant, I also brushed the creatures with some of it to keep them wet and slimy. 😉

The only problems I have with resin are the cleanup (I got some on my clothes 😛 ), and the leftover resin that will need to be discarded since it can’t be stored for later use. Here’s a bonus pendant that I made using the extra resin from the current project, some glitter and a mold – it’s got nothing to do with the challenge, though. 🙂

Resin and Glitter Pendant

I adore both pendants, and love the resin-boost that this project has given me. Thank you, Lesley, for this inspiring theme!


If you’re curious to see what the AE team and the other guests have made for this challenge, go have a peek at their blogs!

Guests:    Raven       Kelly       Cat       Kathy       Tammy       Alyson       Elaine       Mischelle       Deborah       Anita (you are here)      Jill       Shirlee       Sarajo    •    Melissa

AE Team:   Caroline       Cathy       Claire       Jen       Laney       Lesley       Marsha       Niky       Sue       Lindsay    •    Jenny

Summer Horse | Art Elements Challenge

The team at Art Elements has recently started hosting themed monthly challenges, which involve a reveal and blog hop at the end of the month. The theme for April is Horses, picked by Jenny, with the reveal being hosted by Cathy.

At first, I thought “Seahorse!” These creatures have inspired so many artsy pieces (especially jewelry.) Thinking on and off about seahorse projects, I slowly realized I wanted to stretch myself and go for the land-horse, which I find more challenging.

I didn’t delay starting the project as much as I did last month, but it definitely began in the later half of the month. 🙂 My aim was to create a horse head accessory for a tote bag that my sis and I plan to make – the horse would be made of polymer clay, and have a beaded mane. I also wanted to check off at least one item from my make-nine list for the year, and I chose alcohol inks.

Summer Horse - Beaded Polymer Clay Charm

The colors in the project are inspired by the summer here, with blue added in since it’s also been raining recently! That’s some weird and wonderful weather. 🙂

The Claying

I drew an outline of a horse head using rough strokes, traced it multiple times with my pencil, and pressed a sheet of white-with-translucent clay on it to transfer some of the outline onto the clay. On the other side of the sheet, I used a texture sheet to add a pattern I liked. I then cut out the figure roughly following the pencil outline.

Now came the trials with alcohol inks. I added drops of different inks over the textured clay, prodding them so they mix well at the boundaries. When I was satisfied with how the colors looked, I let the ink dry a bit, and dabbed a paper towel spritzed with rubbing alcohol to wipe away some of the ink on the raised surfaces. After the ink dried fully, I applied Perfect Pearls on the raised surfaces.

I added one more clay layer with a simple-textured back to strengthen the piece, and added some color to the back and the edges with chalks. To help with my beading of the mane later, I poked holes 0.3cm apart all along the top of the neck.

Baking time! (I already liked how it looked when it came out of the oven; the Perfect Pearls, however, seemed to have dulled a bit.)

The beading

I added beaded fringes, each 15-18 seed beads long, one fringe per hole, ensuring that overall color theme of each fringe matches the color of the base clay in that area. As I made the fringes, I began attaching them to one another to keep them in place. To steady the top of the fringes, I made a 1-row modified brick stitch edge behind them, along the top edge of the neck.

This is one of those rare times that a project turned out better than I’d hoped for – I totally love this piece! Challenge accomplished, as far as I’m concerned. 🙂

My sis and I have not yet taken a call on exactly how we’ll use this – it’ll either be a short swinging charm, or held in place on the bag. Meanwhile, I feel a little more confident about alcohol inks now, and I can’t wait to use them more!


If you’re curious to see what the AE team and the other guests have made for this challenge, go have a peek at their blogs! (Some guests don’t have blogs, so AE team member Laney has posted their creations on her blog.)

Guests:    Alysen    •    Anita (that’s me!)    •    Beth    •    Catherine    •    Jill    •    Paulette    •    Raven    •    Sarajo    •    Tammy

AE Team:    Caroline    •    Claire    •    Jen    •    Laney    •    Lesley    •    Marsha    •    Niky    •    Sue